Scaffold Accessories

3-4 Guardrail System

Part No: MFGRSET3/4

This safety guardrail has a patent-pending feature that allows the removal of one of its side panels when working close to a wall.

Safe, secure, and durable.

Ideal Angle Outriggers

Part No: MFOUTR18ASET4

18 inch outriggers clamp to the bottom of your scaffold tower to increase the base width. This is used to increase the stability of the tower.

Three-Stack Outriggers

Part No: MFOUTR44SET4

This outrigger pins to the frame with an upper and a lower pin and a bolt to eliminated all slop. Our large outrigger is 30 inches long.

Use this when stacking 3 high.

Multifunction Stability Kit

Part No: MFSTABKIT

The multifunction stability kit turns what’s designed for DIY’ers and craftsmen into a platform with industrial stability. Add this to our 6’ Multifunction Unit to make it feel almost as if its parts are welded together.

Work Smart Toolshelf

Part No: MFTSHELF

This tool shelf can be mounted on the guardrail system as well as end frames.

It fits where you need to use it -- waist high, knee high, above the platform, or down low on the ladder frames as well. Inside or outside. It even has a place for your coffee.

Multifunction Caster Jacks

Part No: MF378CJ

This jack fits between the end ladder frame or outrigger and the caster. They allow adjustment for greater overall height but are indispensable when working on uneven surfaces -- even on stair steps.

Multifunction Hatch Platform

Part No: MF379HATCH

This platform allows you to climb a multifunction ladder frame internal to the scaffolding, which is much safer than climbing the outside.

When the climber reaches the platform, they simply open the hatch and climb through. The hatch closes behind them and is secured by a spring-loaded locking mechanism.